Archive

Category Archives for "Resources"

Are Massage Chairs Bad for Pregnancy

What Is Pregnancy Massage?

Pregnancy massage is a catch-all term for any hands-on massage during or after pregnancy (prenatal or postnatal massage).

The duration of pregnancy massage lasts only for an hour. Some users use a pregnancy massage table.

A type of table made to accommodate a woman’s pregnant belly. Another option is used which named as bolsters to keep a woman comfortably on her part.

It aids the women in particular for the later stage of pregnancy. So, Lying on your measurement is the most contented position.

Massage Chairs in Pregnancy – The Bad

The Heating Modules

Most people normally do not think that the massage chair is great for the pregnant women as many support heating module.

The cause behind these is the overall high body temperature which causes a condition known as Hyperthermia.

This is the view of Mayo Clinic that the condition may be triggered by the hot bathtub that may raise your body temperature up to 38.9 C.

Studies found that the babies who have undergone high temperature in the first trimester have the high risk of spinal cord or brain abnormalities.

Massage chair gives heat only for the calves and back- so it is not possible to raise the temperature of the whole body. But they must use the chair with more caution.

Preterm Labor

It is clear that certain pressure points of the human body may affect the reproductive system. Some think that the pressure point around the legs, feet, and ankles may send a woman to premature labor.

Many massage therapists admit that they have got training to ignore or identify the pressure points in a pregnant woman’s feet as they have a direct effect on uterus tissue.

Are Massage Chairs Bad for Pregnancy

On the other hand, there are numbers of medical professionals in the medical field that are not agreed.

To express any of the versions accurate is not possible. The reason is that still today there is no proper research to get the actual findings in this regard.

If there is no reality in such matter, it may be better to be cautious as long as a result proved wrong.

Massage chairs come with foot roller to ensure reflexology massage while ankles and other parts of the legs are massaged by the airbags, that might trigger those trigger points.

The safest way to use a massage chair for pregnant women is to keep legs on the other chair or on supporting materials rather than keeping legs on foot massager.

Massage Chairs in Pregnancy – The Good

Back Pain Relief

Back pain is a common phenomenon for a pregnant woman. About eighty percent of pregnant women around the world experience some sorts of back pain at the time of pregnancy.

Are Massage Chairs Bad for Pregnancy

The pain may feel from lower to mild pain sensation around the lower back area to chronic back pain.

Massage chair only can give them relief from the pain of having heat massage capabilities. Again, be careful at the time of using heat option to escape Hyperthermia.

Reduces Anxiety and Boosts Mood

Students also found that the massage chair is a great thing for them to help with the common issues like negative mood or anxiety.

The examination has done over 32 healthy women with 45-minute massage session to see if it helps to reduce anxiety as well as negative mood.

They have got a significant result for these two issues from just one massage session.

Improves Immunity

Well, immunity is a considerable thing for the people as it ensures a healthy life. It becomes more important if there is another life inside of you. Getting a massage chair may improve immunity, you might have ever heard. But it is approved by the study.

Are Massage Chairs Bad for Pregnancy

The examination was conducted in colorectal cancer patients. They had gone through chemotherapy.

A type of treatment that destroys the white blood cells and makes the immune system more vulnerable to infection.

The researchers said that the massage chair develops the immune system by improving the numbers of lymphocytes.

Is Using a Vibrating Massage Chair Safe During Pregnancy? 

The researchers of the University in Pennsylvania Office of Health Education told ‘‘the massage chair improves the upper body circulation’’. So it provides relief from different pains and aches.

The demand of massage chair has come from this concept. There are some special chairs which are very useful for pregnant women. Does the vibration from the electric chair develop fatal for the fetus inside the womb?

The fetus inside the womb is covered securely in the amniotic sac. It contains amniotic fluid. This sac and fluid cushion the fetus. So it provides lots of protection to it.

Sitting on a vibrating chair of massage has no effect on the fetus. The vibration of the chair is similar to the vibration caused by walking. It doesn’t leave any harm for the mother of the baby.

The concern that is going to be a mother is the electromagnetic radiations emitted. The chair runs on electricity.

Therefore the electromagnetic radiations emitted from here are very fragile. At the same time, it is strong enough to cause any harm to the growing fetus.

Chair massage is very safe for all stages of pregnancy. It is very useful for the second and third trimesters. The first trimester is very risky and adds the possibility of miscarriage.

A pregnant woman can sit on a vibrating chair twice a day from 15 to 20 minutes.

Spending more time on a vibrating chair becomes the cause of muscle pain. Though one uses the massage chair in moderation, there will be no harm to the mother-to-be.

After all, vibrating chair is safe enough for all pregnant women. However, women having big bellies must not give more pressure on their belly at the time of sitting on it.

When a woman has very large to fit on the chair, she shouldn’t try to squeeze it. It gives more pressure on the abdomen. This is not safe enough. Women who have complications against placenta, praevia etc. during pregnancy must avoid it.

If you are pregnant, we advise you not to use this massage chair. The reason is that these notifications are preliminary put on the label. Manufacturers forbid the pregnant women to use this chair.

Some may face complications after sitting on this chair. The reality is that they faced complications, not for the chair but they blame the chair for their bad luck.

So what finally

Is a massage chair safety option for the pregnant women? Yes, it is. Just like some other options, you can use the massage chair though you are pregnant.

At the time of using the massage chair, you must be more cautious.

Before you like to use a massage chair, it is better for you to consult with a doctor. After all, a massage chair is not bad for the pregnant women.

 

Watch: Are Massage Chairs Bad for Pregnancy

What Is The Difference Between Massage Chair vs Massage Cushion

The massage chair is a very costly item. If you have narrowed space in your room or if you do not like to spend more money for buying massage chair, the big option for you is to buy a massage cushion.

It is easy to use and convenient. Installation needs only a few seconds, and you may have to use a massage on your couch or chair wherever you like to use.

After finishing massage session, you may fold it and can store it on an armchair permanently.

After coming back from office, you get the massage cushion ready, and it will give you relaxing massage. There are lots of massage chair pads in the market having different models.

Massage chair

Are you thinking more and more to buy a massage chair? There are many factors involved with it. Once the decision is taken surely, you have to think which chair would you like to buy?

There are some factors which are essential to give importance. This is the place where things may get tricky. You get lots of brands and models near your hand. So it is very easy to get overwhelmed with these factors.

Don’t choose the wrong one. Select a right one which is most suitable for your demand. You must have taken some few tips for taking the ultimate decision.

The robotic chairs are super investment for your money. Getting a nice one is a very challenging task. It is easily done by considering few important factors.

Here is a massage chair buying guide. There are some tips inside it. We hope these tips will help you to get the right one most suited for your need.

Massage Cushion

A human body remains very busy from morning till evening for the maintenance of the family, society. All things make life stressful.

At the end of the day, you become very tired. So you need to take rest for the body and mind as well. This will save your body diseases. Going to a salon every day is quite impossible or sometimes affordable.

You have to spend more to do so or you need to spend enough time to visit a spa or ask for a therapist.

Using a massage cushion is the best and convenient solution to this act. Now you get lots of advance level massage cushions which have more features.

Cushions Are Lightweight

One of the most attractive features of the massage chair is that its lightweight structure.

You have to buy a massage chair weight not more than 30 lbs. It aids to more simply.

The weight of the massage chair is at least 100 pounds and if you get the right spot for it. This weight is not convenient to use for all the times.

A Cushion Will Fit on Any Chair

A massage cushion is a kind of versatile part of the equipment. It ensures you many features which come with the chair; you may use them for existing furniture.

massage chair vs massage cushion

You should not rearrange anything. You may use the cushion for many chairs at any time. If you have a god type of recliner before your TV set, you have no desire to give it up.

You may put your chair to the desired place. You can buy a chair and enjoy the massage chair just now.

Considerable Savings

Besides convenient ability and lightweight nature, there are other great benefits of massage chair- they are a heck of more cheaper that the massage chair.

Under 200 dollars you will get a good quality massage chair. But the reality is that a decent type of massage chair would cost at least 500 dollars or well over thousand dollars.

With your desired budget, you will get a wonderful massage chair which has all the necessary features you like to get. It must be something you are always thinking for.

You Can Even Take Them in the Car

I have used lots of massage cushions, and they impressed me much. You may take them with you for your car.

massage chair vs massage cushion

When you are considering to buy a massage chair, you must consider some factors most.

You need to examine the features fully. All cushions do not have the quality. Only some have car adapters.

We have to spend six hours to reach our cottage and driving is very hard on the back all this time- having a good massage will be a comfortable thing for us.

Missing Some Features

You will be surprised to know why people like to use a massage chair on a massage cushion.

The reason is that they have not all the features of a massage chair. For having static nature, it can add air bags and more rollers.

It will ensure a satisfactory massage. For having limited nature cushions are not very expert for feet and legs.

Not Always Secure

The only complaint about the massage chair is that they are not always secure if you like to secure it.

Most of them come with straps that keep the cushion in its place. How they work depends on the dimension of the chair, in some cases straps are totally useless.

Not for Reclining

One great issue that you normally face is that you normally can not recline it. There are lots of benefits of using a massage chair while for the zero gravity it may reduce the stress on the heart and you feel more comfortable in general.

massage chair vs massage cushion

The massage chair does not have the power to recline. It is a portable device, and it loses many functions in such case.

A Worthy Alternative

I can clearly say that the massage cushion is not answered by all the people. But they are a great thing if you are on a budget.

They are very wonderful if you like to have some portable. Some massages are real rollers built so they can ensure you a quality massage.

There is no real answer the question, or a massage cushion is better than that of a massage chair- It is completely up to the personal use of the users.

Guide On How To Paint Wooden Chairs Without Sanding

The product is very challenging and would remain for a longer time. But see it just nestled to the shelf of the hardware store. We would like to paint trim, furniture and so on.

To have painted to adhere to wood, you normally like to sand to obtain the grip, particularly anything which is varnished. You may paint except sanding by applying liquid sander degasser. It eliminates the finish; ensures rough texture except for the attempt.

Here are five ways to paint furniture without sanding

How To Paint Wooden Chairs Without Sanding

Use a chalk paint

It is very hand down, most usual and famous way to paint anything without much sanding. The great mass appeal of chalk paint is fantastic matte finish but no prep promise.

I like to show argue that the chalk paints are the cornerstone of the painted furniture industry since we are aware today. As Annie Sloan’s Chalk Paints are becoming more and more popular, there are lots of such paints which hit the market.

Use a mineral paint

Mineral paint is like the chalk style paints. It requires not prime or prep. The stick is very pretty than anything. For more bonuses, the Fusion brands are long-lasting. Moreover, it is waterproof and stains proof. Besides, it does not need a topcoat.

Use milk paint + bonding agent

I have said that the antique desk of the post is not pre-sanded. I would like to apply Miss Mustard Seed’s Milk Paint in Trophy gets mixed with some parts of the bonding agent.

The Bonding Agent is a type of milky substance which works as a primer to aid adhere the milk paint for your protection.

The grip is very amusing and very simple to use. Mix the same parts of bonding agent to your milk paint. Especially the Bonding Agent is needed on the first coat.

Use a bonding primer

Best quality bonding primers state no sanding is essential and may stick to a glossy surface such as tile, metal, and glass, etc. There are some famous primers in the market like B.I.N, Kilz, and Zinnser.

They are popular for excellent binding power. If you read any of my regular blogs, you will know well that I am a fan of BIN Shellac Primer.

This is my favorite stain and odor blockage including bad bleed although it has all. The best type of primers may take cost somewhat more but well worth.

If you like to have the best quality primer before like to paint with a famous paint, sanding would not be a must.

Use a liquid sander/deglosser

Liquid sandpaper or degasser is not a famous method to escape sanding furniture. The liquid is used on the surface. When you use a new paint, a chemical reaction happens and grips on the new paint.

How To Paint Wooden Chairs Without Sanding

The smell is very good, and it is best for use in a well-ventilated space. I would like to apply the product for scroll details on furniture such as I do this vintage piece here.

This is very simple to use by wiping or brushing and paint within the schedule knowing the directions.

Painting Over Varnish Without Sanding

You may buy TSP for Home Depot or Lowe’s to rinse wood tabletop or the surfaces of the cabinet and then wash off. Then you need to make it completely dry as much as you can before painting. We should move to the prime wood paneling as the wood top kept bleeding through for using TSP. It needs to use a coat with paint a couple of time.

Spray painting old furniture

Spray-painting obtains the work normally done, normally under ten minutes. Compare it with normal paint, it dries rapidly, and you cannot deal with telltale brushstroke marks.

If you become the master of spray-painting, you may flip any object and do it without spending more money. Garage sales and thrift stores are overflowing along with well-furnished furniture having wonderful lines which need a little TLC.

Moreover, some of your own older pieces may become dear by a new coat of color. A paintbrush, as well as a can of paint, can seem like the same way to move but you can brushstrokes and doing different coats. Do not permit spray paint to intimidate you- this is an easy way to have even finish than you assume.

  • Step 1: Shop
  • Step 2: Prep and Clean
  • Step 3: search a space
  • Step 4: Prime
  • Step 5: Spray-paint it
  • Step 6: Seal it

If you do any mistake, you can correct yourself with another sanding job. Yes, it may take work or more time, but your piece will not be ruined. As you get the paint is not sticking even after priming or sanding, use other coat of sand and primer afterward prior using paint again.

Spray paint would not be very useful as well for some materials like plastic or metals. Therefore read the instruction carefully to know which project is fit for the paint.

Tips on Wooden furniture painting

Painting wall is one thing. But you should take some measures to paint your furniture to make it a successful one.

  • This is best to save stains from bleeding inside the new paint
  • Primer should be matched with the paint you desire most. It would be best to use a semigloss finish or a satin in either an oil-based paint or a latex. Don’t keep primer unpainted.
  • Latex primer is a great choice for most of the users. It blocks most stains easily. But it has no odor like an oil-based primer.
  • You have a chance to use oil-based primers with latex paints though you use oil based-primer with oil-based paints. Oil-based primers give stain blocking and fine adhesion. But they have a very strong odor. You need super ventilation while you use oil-based paints and primers.
  • At the time of painting, start at the top and move to the down. Smoothing paint trickles since you move downward.

Latex paint has different of sheens such as semigloss acrylic latex, flat oil-based enamel and low sheen or satin. Oil-based paint is possible to use both interior trim work and exterior painting. This paint is long lasting and very simple to clean.

Some More Ideas

If You Want distressing

The Vintage or Shabby Chic seems fashionable and truly simple and amusing to make. It is what you are going for; keep some of the minor cosmetic scratches as the parts have any. After that be ready to do a small scuffing one, it is dry also.

Give Deglosser a Go

Deglosser may change your life. If you do not like to accept the sanding and would not like to go forward to primer, use it at once.

This is a type of liquid sander. You have to use an only brush to paint it, wait for fifteen minutes and then wipe off. This is a great shortcut.

Pro Tip

To notice as degasser is the exact choice for your part, examine it in a congested area after that paint the spot. Since the patch of the paint is dried, apply the fingernail or a coin to attempt and scrape it- it may say you if the paint adhered well.

Try Chalk Paint

Chalk paint is small pricier but moves somewhat long way. You can get 1 or 2 coats of chalk paint versus 2 or 4 coats of usual paint.

Pro Tip: Remember that chalk paints dry more quickly than other paints on the market. When it wets, we feel calm if touch it, after that room temperature if dried.

Watch: How To Paint Wooden Chairs Without Sanding

A Very Useful Guide On How to Fix Loose Chair Legs

Rungs, spindles, and loose legs may become loose on the wooden chairs which are used more. But the problem will not be solved.

Loose rungs and spindles, bracing are used, loose legs, sometimes mended by forcing glue to the joints. To do the permanent repair, separate the parts carefully from the frame.

When both parts are loose, take away the entire piece. To make stubborn joints twist the section slightly, to remove the glue bond if needed, utilized self-locking pliers. To save from damage pad the parts with the wood from the pliers.

how to fix loose chair legs

Remove the old adhesive totally from the part of the socket. On old glue, the new one does not bond well. Be careful not removing wood from the end of the part.

When you completely remove old glue, test its end parts with the socket. If you get the end snugly, use glue to the socket and reenter the loose part. Clamp the re-glued joint and make it dry well.

As the parts are loose inside the socket to make firm joint, you need to enlarge it. As you get tenon end cracked, you need to reinforce it. Use a thin coat of glue with the tenon, and then wrap it closely with the thread layer.

Keep it one day to dry and glue the reinforced edge tightly with the socket. Enter it with great care as you do not like to disturb the thread. Then clamp the joint and keep it to dry well.

Loose legs or rungs may be wedged to adjust if tenon is perfect. Clamp with visa or aid to hold it, see the center of the tenon carefully.

The cut has to be centered or square, badly in the depth of parts and adjust with the socket about three by four inch. For the tiny part, use a hacksaw to cut it. For the thicker part, use combination saw or backsaw.

The target is to expand the saw cut lightly with a wedge, enlarge the tendon to adjust the socket. If you are satisfied with the wedge, it would be the right size, carefully tap the wedge with the saw cut.

If tension is slightly enlarged, prevent pounding and remove the additional wedge from the wood. More wedging may split the tendon. Do not pound the wedge very far.

To know the wedge, enter the end with the saw cut and tap it with a screwdriver handle. When you see the wood on the both sides of the cut to spread, the wedge is very wide. Use the glue at last and reassemble the joint.

For wedging method, you are not able to disassemble the piece of the furniture. You have two good ways to do it. If the joint is very loose remove more adhesive as you can.

Remove thin wedges from the molding – pine lattice is the best solution. Plunge wedges into adhesives and remove the wedge by a hammer round the loose part of the socket and part.

Use a knife to trim the end of the wedges flushes with around the wood surface. Equalize the pressure from wedges as you may drive them in. If you do not be careful wedges may throw the part of the alignment, makes the joint weaken.

Get up is the factor, drill a 1/16 inch hole by the side of the loose part and joint. After that make a metal pin from finishing nail or 10d common.

Cut the top of the nails with the help of a hacksaw. Use one of two drops of glue in the hole and then drive the nail. Countersink a nail and a pin set to another nail and fill the hole with the wood filler.

How to Reinforce a Loose Wood Chair Leg

The necessary things are

  • Sandpaper
  • Measuring Tape
  • Marker
  • Screw
  • Glide
  • Drill bit
  • Dowel rod Glue

A loose chair is a very frightening thing. You don’t know when you can fall off from the chair.

The whole chair may collapse under pressure. Do the following steps carefully to reinforce loose chair legs except draining.

Step 1: Initial Steps

Put a piece of cloth on the floor and overturn the wood chair. Take a measuring step to ensure the accurate length of every leg.

Not define which leg is somewhat wobbly or loose and individually note its length. Take a marker to measure other lengths of the chair by a marker.

Step 2: Sanding

Still, you see the legs of the chair are creating a problem for wobbly, you can follow a simple step. Stand the chair on other three legs of the same distance from the loose leg.

You can use 80 grit sandpapers and then wipe the legs. The legs get somewhat shorter.

Use a sandpaper that is 220 grits to sand as long as you see the length marked on them. You see, all legs are of equal length and chair must not wobble.

Step 3: Placing Glides

Another problem of being the chair’s leg lose is that the glides kept to the bottom are missing. Glides are normally made of metal or cork and may be sitting to the base of the legs.

When an old glide is missing, you need to replace a new one or something changed a broken glide as well. Buy a chair leg glide from the hardware shop and use it to the base of the chair leg.

There is a pre-drilled hole. Ally it to the leg base and make a hole to the same place of the base. Enter a screw and tighten it up to the leg.

You have to replace the glide, loosen the screw by the old glide is adjust to the place. After that, screw the new glides as shown in the instruction manual.

Step 4: Doweling

The top way to reinforce a loose leg is to make a drill in the dowel rod. You get this in hardware stores. A ¾ inch long and 1/8 inches in diameter would be the best for a standard leg chair.

Keep the chair in upside down position. Then pull off the legs which are loose and cracked. Create a hole by the drill bit in one leg. The hole should be in the same diameter of the dowel rod.

The depth would be 3/8 inches in depth. Keep a nail inside the hole to keep face upward of the pointed part towards you.

Make parallel 2 pieces of the leg to each other tightly so that nails make a tiny impression on the piece of the leg.

Remove the nail and drill in a hole to the space of the impression. It must be of the similar diameter and depth. You can use pliers to keep the rod tightly. Use wood adhesive to each end of the dowel rod.

Enter into the hole made of the pieces. Secure a bar clamp with the leg to keep it in place when setting up dries.

how to fix loose chair legs

Final Tips

  1. Move the chair up side down. Hold the legs with the hands. Twist and wiggle them to be confirming loose dowels, mortises, splits, and cracks.
  2. Draw the legs apart if you can. When the motion exposes tenons or dowels, use glue to the exposed part of the dowel or tenon. Use clamps to the compress the mortise or dowel with the hole or mortise. Remove wet glue with a damp cloth. Let the glue dry for the overnight. After the clamps. Remove the dried glue with a putty knife.
  3. Make it piece as more as possible with a knife. Use glue into the crack until it saturated. Keep clamps on its leg and tense to condense the crack.
  4. Enter 3.8-inch drill into a driver or drill. Drill the crack and do it all the way to the leg. If the split is three inches long, drill two holes and spaced eventually.
  5. Tap 3/8-by-3’’ dowels in the holes with a hammer. Let the dowel to overhang from the sides of the legs. Use a damp cloth to remove excess glue from the damp clothes. Make the glue dry for the whole night.

Cut protruding ends of dowels off flush with the help of coping saw. After that sand, the edge of dowels smoothly applies 120 grit sandpaper. By using a stain marker color the end of the dowel.

THINGS YOU HAVE TO GET:

  • Putty knife
  • Chisel
  • Masking tape
  • Wood glue
  • Clamps
  • Pin nailer- 1-inch pin nails
  • Drill/driver
  • 3/8-inch drill bit
  • Hammer
  • 3/8-by-3-inch dowels
  • Stain Marker
  • Coping saw
  • Putty crayon

Reminders for strong glue joints

  • Be sure the gluing surface is smooth and clean but not very glossy. The rough surface does not allow more glue contact. The glossy surface does not help the glue to penetrate the fiber and gets a good grip. You may sand little to remove gloss or smooth roughness but do not attempt to shape a joint by sanding. This is not possible to have a good mating fit in that way. As you are sanding, apply a block and be careful do not round over sharp edges.
  • Clamp all a type of glued joints. Pressure is a must to create tight and gap free bond and to force glue to the wood fibers. Clamping saves movement though glue is hardening. If you fail to use clamps, you can use elastic cord, screws or weights.
  • Try a run with clamps before using glue. This allows you to notice for good fit and confirms that you have clamps adjusted with proper length and other essentials tools are ready. It is a must to finish glue- up very quickly most likely it may take 2 or 3 minutes, and clamping will be finished within

Watch How to Fix Loose Chair Legs

Step By Step Guide On How to Fix Wooden Chair Joints

Wobbly chair

We have sat on a wooden chair which is not same as other. This chair stirs more than a trifle at the time of earthquake instead of giving a stable place to sit on.

You need to make the quest careful again and again while sitting on the demon chair.

The wobbly chair is somewhat inconvenient. Frustration increases if the wobbly gradually eats away your sanity and patience. Closely follow the instruction to mend all of the wobbly chairs.

Reasons the chair is wobbly

You have to find out the reason why a chair becomes wobbly. One should know it very well before he or she likes to repair it.

There are some syndromes of wobbly chairs. We have mentioned some of them below:

  • General usage – Most of the chairs are very lightweight. Its weight is more than a few kilograms. But the weight it carries every day is many times larger. The weight of the peoples’ body isn’t static either. We twist, move and turn to get a comfortable spot or to get something on a table. When we move around, our weight adds pressure to our different joints. Weight weakens them and becomes the cause of losing joints. The looser the joint becomes the more the wobblier we desire.
  • Age –Time keep destruction on everything. It may be an inanimate object or it may be a person. Nothing is completely free from the ravages of time. With the passage of time, a wooden chair becomes weaken or loosen due to the wood shrinking or breaking.
  • Poor craftsmanship – Sometimes poor construction becomes the cause of breaking or weakening a chair. It is usual for poor craftsmanship as well. The wooden chair becomes a wobbly rocking chair very quickly if the construction is very poor.

Ineffective repair – Most people like to repair a wobbly chair very quickly. So they use some glue to do it. This can solve the problem for a short while but it isn’t a permanent solution.

The problem is very general. The chair is the complicated piece of furniture. The press we use on it may cause the breakdown of it.

As the glue joint breaks down, the joints rub forward and backward within individual sockets, the wood fiber break down and the joint becomes looser. It leads us to two important points to repair a chair with the wobbly joint.

Remove all glue from the joint first and use new glue. There is tight fitting between the joints; you can clamp or re-glue, then get a successful repair.

how to fix wooden chair joints

Since the wood fibers break down at the joint, you have two alternatives. One is rinsed the joint and glue the new wood into stretcher or mortise and reform or re-drill the mortise, make a well joint again.

Another way is to clean up the joint once again to the wood fibers that are free from old glue. Again use epoxy to re-glue joint once again. The way is not reforming the joint by good wood… it may be fruitful.

Tim Inman: One of the main troublemakers for future restoration work is the wood movement. With the passage of time joint has changed or moved sizes.

The gap is little bigger or surely goes out of the round. The hole will be little bigger or may go out of the round. The tenons become somewhat smaller.

This may happen for environmental factors or wood drying out or for keeping furniture too close to the fire or near to the stove or may be going through a flood. A close fitting part works well for most wood glues. Gap filling is a must for old loose joints.

There are lots of ways for filling the gaps. Some need Cabinet is making skill, and some are cruder. It is up to the value of furniture you are likely to work with and time/ skill/ investment you like to make; you have various choices.

If you have a valuable piece of furniture, use time or skill to invest. I suggest using the job to do with expert professionals.

They have many options to solve` the joint problems as they do work well to restore furniture. Get garage sale and start learning curve of them. Try to save your valuable furniture with the experienced or expert hand.

Woodworking Joints

  1. BUTT JOINT

A butt joint is a very simple joint. It is very week in the sense that you can break it with barehanded. Here two pieces of woods are joined merely with butting them together.

If you don’t use some form of reinforcement, it will easily break down. The joint only depends on the glue alone. Glue doesn’t provide much internal strength. So it will easily break down.

  1. BISCUIT JOINT

A biscuit joint is same as a reinforce Butt joint. It is made of compressed and dried wood like beech.

Moreover, it is an oval shaped piece. You set it up in matching in both pieces of the wood joint. People like to use a biscuit joiner to prepare the mortises.

Accuracy isn’t important here for the mortises. You have to make design the biscuit joint to allow flexibility in glue up.

You should place the mortise to an accurate distance from the face of the woodworking joint. As the biscuit is thin, you may move the alignment around. The width of the mortise isn’t a factor at all.

This is the only reason for which I don’t like this joint. This is not a nice alignment. Moreover, you like to spend money for Biscuit Joiner.

  1. BRIDLE JOINT

A bridle joint is same as a tenon or mortise. Cut a tenon to the end in 1 piece and a mortise to the other piece to get it.

You may cut the mortise and the tenon to full it. This is a special feature of this joint. It has only 3 gluing surfaces.

The corner bridle joins only 2 pieces to the end to create a corner. It ensures good strength. Here you need a pin or fastener to set it up.

You can also use corner bridles for joining the frames. When an assembly is completed, you can remove the materials without forfeiting joint integrity.

T-bridle can join the edge of 1 piece with the middle of other pieces.

  1. DADO (JOINERY)

A dado is a piece of wood cut from the top surface of the wood. If you look closely you will find 3 sides of it. You may cut a dado perpendicular to the granule.

The end of the dado is open. It passes all the way inside the surface. This is different from the groove that you cut parallel to the grain. A stopped dado ends up prior it meets the edge of the top.

You may use dados to add shelves with a bookcase carcass. You can rabbet the shelves to raise the dado that makes the dado and the rabbet joint. This is a good thing for woodworking joints.

  1. DOVETAIL WOOD JOINT

The dovetail joint is a very strong joint for wood. You may use it to join the sides of a drawer to the front. This joint is very excellent for tensile strength.

Here a series of pins cut to expand the edge of the board interlock by lots of tails cut to the end of other board. The tails and the pins have a trapezoidal shape.

If you join it with glue at first, it will last for a long time. It demands no mechanical fasteners. Some people like to use a dovetail dado for the strength of the tensile.

  1. FINGER JOINT

A finger joint is a very popular wood joint for working with wood. You can do it by joining 2 pieces of wood at the right angle to each other.

This is very much similar to the dovetail joint if pins are square. It has no angle. Here glue holds the pieces all together. This joint has no mechanical strength for a dovetail.

  1. Pocket Joint

In a pocket joint, you need to cut a slot and pre-drilling a pilot hole to an angle between 2 boards prior adding 2 by a screw. For pocket joints, pre-drilling is a very important thing.

So it is normally done by a commercial hop. You can use pocket joints for cabinet face frames.

Some other types of applications don’t need much strength. You should know the steps clearly to make pocket joints for your woodworking projects.

Wobbly Chairs

Few things are unnerving that taking place on a wobbly chair. As loose glue rungs and tightens, the hardware may not work. Then use right angle corner braces.

You may buy the braces from home improvement sores or hardware for couple bucks for a four pack. Buy paintable type if you like to paint the braces matching with the chair.

Add the brace where legs meet with the seat. You can bend the brace little as it flushes against the legs of the chair.

She says you should not keep gaps between the legs and the brace. Confirm about the pilot holes before using any screw. It may keep the wood from splitting.

Broken Back Rails, Spindles, and Slats

On chairs having horizontal rails to the back, the rails mortised to the other posts into a top rail or mortised to a curved or straight rail.

You can replace slats, rails, and spindles easily. The replacement would cost more. Do not think if the investment is not worth. To replace broken pat use a millwork or woodworking shop custom create a new part.

how to fix wooden chair joints

First, dismiss the chair back. It is joined with the back of the seat, legs, and rail. Pry the joints apart, remove screws or nails.

Disassembly joints involved in the repair. It is not necessary to disassemble the piece to obtain the part. You are not confirming that you may able to reassemble the chair, so use the number to indicate the parts.

Take broken part or similar undamaged part to the woodworking or millwork shop for duplication. Clean the old adhesive carefully from the joints.

After that, resemble the chair with the new section, use glue for the each joint. Resemble the chair with new glue. Clamps well until the adhesive dries well after that refine the chair totally.

Outdoor chairs made with the wooden slats are same to repair. But slats may be replaced with thin boards or wide molding.

Shape a piece of wide molding if you like to replace the broken slat. As the slats are fastened with the screws, drill screw holes and add with the old screws or match with the new one.

If they are fastened with rivets, drill to take the old rivet out and replace with the pan head or self-tapping metal screws.

Watch: how to fix wooden chair joints

Amazing Step By Step Techniques On How a Plastic Chair is Made

Plastic chair is the turning point in the history of furniture design. They are the sign of functional construction and independence of expressing something.

It gives beauty and practicality. In the 60s, the history of plastic chair began, with the first furniture series.

In the beginning, there are many advantages of chairs: ergonomics, economy, flexibility.

The chairs are made of metal structure and plastic, adding many pieces of interlocking pitchers and nails, etc… the innovative chair is the uncommon piece of Plexiglas or colored plastic, saves solutions and originals forms, free from any limit.

The record of plastic chair started with Selene, a kind of model made by Vico Magistrate in 1967.

It is made of translucent plastic with various colors and designed to stack and uses both on the outside and inside.

Most important one is the Panton chair designed by Verner Panton and popular 861 by Joe Colombo.

The 1st cantilevered chair is made from the single mold and offered to sinuous lines which same as the female body.

The 861 is also made from a single mold and cut in well size legs which are stacked up to the maximum of 3 pieces. It is just like a bench which has more seating capacity.

Plastic chair history

Plastic chair is a new addition to the history of furniture design. It has added a new dimension for the users. These chairs are the archetype of freedom of expression and functional construction. In another way, it is beauty and practicality.

The history started during the beginning of the 60s with the first furniture series. There are many advantages like ergonomics, economy, and flexibility. Normally these chairs are made of wood.

Sometimes metal structures are set up by interlocking pitchers and nails. The new chairs are an uncommon piece of plastic or plexiglass. They have space-saving solutions which are free from any limit.

The extrusion process industry gives the freedom of artistic expression. It has the ability to lead our project for a long time. The chair becomes a true model of design.

The history of official chair started in 1967 by a designer Vico Magistretti. The name of this chair was Selene. It was made in translucent plastic with different colors and designed with easily stacked.

One can use it both inside and outside. Very important are the Panton Chair by designer Verner Panton and popular 861 by Joe Colombo. The first cantilevered chair was designed from a single mold and shown on the sinuous lines.

These were same as a woman body. The 861 was designed from a single mold and featured by exact cuts on the legs.

It was possible to be stacked on a maximum of 3 pieces. Additionally, it was at first designed to make a bench which has more capacity for seating.

Plastic chairs are very useful for all purposes. One can use it in garden or indoor, private or public places, side by side or stackable, transparent or colored. There are lots of features with these chairs. So, one can adapt to the demand of the space.

At the same time, the chair has so many features. Subsequently thanks for lines, shapes, and colors. Design demands the contemporary context.

The utility of recyclable materials has made a new model of the chair which is abreast and innovative. It comes with all environmental requirements of the society.

The material used in a plastic chair

Generally, most of the plastic chairs are made of polypropylene. These are mounted in various sizes, shapes, and colors. All are lightweight in the sense.

There are both benefits and drawbacks of the components of these chairs. The materials of ABS chairs are expensive than the polypropylene chairs. Furthermore, the overall strength of ABS materials is more than polypropylene.

Polypropylene has a tensile strength of about 4000 psi and ABS has a strength of polypropylene is 5500 psi. ABS is lighter and hard comparatively. So we can say ABS has stronger materials out of the 2.

This chair made of polypropylene. It lasts longer than ABS. Polypropylene has natural ability to be molded in some nice crafted chairs.

These chairs are looking exceptional than other chairs. Nevertheless, ABS is used in recliners and rocking chairs.

In another way, polypropylene is a nice office chair fit for indoor and outdoor usage. There are some basic differences between these two chairs. ABS is sturdy and hard than polypropylene.

The polypropylene chairs are very lightweight as these are made of softer materials. Still, you have the desire to buy this chair, reconsider some factors such as price. Then come to the final decision.

Rotational Molding

The first process is rotational molding. Plastic models are made in various ways, and all of them involved metal molds which are curved to make the desired shape.

How a Plastic Chair is Made

Among the models, the rotational model is the best models where big metal mold is entered with plastic polymer power.

This makes the heating or melting easily.  The mold is turned three-dimensionally to divide the polymers to every part of the mold.

After a long time of spinning, the mold becomes cool off, and rotation comes to the last of the stage. Finally, the mold is exposed, and the new hollow chair is being altered.

Injection Molding

Injection molding is another kind of plastic furniture making. This kind of mold does not have spin. Instead, the polymers are heated to a preconditioned temperature and rate.

They are kept in cooled or mold. A type of precision is used for this type of molding process as plastic is poured slightly, it can dry soon.

If you pour it quickly, the result may not be in a uniform configuration of the plastic. When you do it properly, the plastic will mold in a particular piece.

Gas Assisted Injection Molding

How a Plastic Chair is Made

Injection molding may be done with the help of gas which is blown inside the mold, pressing the molten plastic out of some parts of the mold.

This makes channels more lightweight and maintains the strength. All the other parts of the injection mold remain the same, the result is the similar parts which are hollow, and some parts are solid.

To make the plastic chair, different types of plastics are blended at the time of processing the plastic. This makes the chair much stronger than the regular brand of plastic in the market.

Advantages of using plastic furniture

  • Comparatively, plastic furniture is less expensive than metal or wood. Stylish and comfortable furniture is made from plastic by spending low cost. If your budget is very limited, you can choose plastic.
  • Normally plastic furniture is unbreakable. Though you handled roughly or drop it, it doesn’t break.
  • All are lightweight. One can move it around the room easily without feeling any problem or without the help of others.
  • Plastic furniture has little or no maintenance cost. It doesn’t require regular maintenance. Moreover plastic is unbreakable. On the contrary, conventional furniture is made of wood.
  • One gets different colors of plastic furniture. So he can change the get up of the room or the mood of the house. Plastic is possible to mold in any form or design or shape. So it is possible to make the desired design with great thirst. Today different styles and designs are found on the market for the need of the users.
  • Wooden furniture needs wood to make it. So collecting wood from the forest leads deforestation or serious ecological problems. Usage of plastic reduces the use of wood in a great way. Therefore cutting a tree is not essential. So usage of plastic protects our environment.
  • All plastic furniture is waterproof. Though you keep it under in rain, it doesn’t get rusted or cracked.
  • Since this furniture doesn’t have any sharp corners, it is harmless. All are very lightweight. This is very safe for the children are around.

Disadvantages of Plastic furniture

  • Plastic furniture breaks easily and lasts for a short period. But proper care can ensure its longevity. Though somebody takes proper care of it, it is subjected to destroy or damage. So you are spending double for the similar furniture. There is no guarantee how much pressure and weight can it endure. It isn’t sturdy enough. Therefore plastic is unsafe in some cases.
  • If you consider plastic with wood, you get plastic lacks elegance and boldness. Even today wooden furniture is very appealing and standard. Some people don’t like plastic furniture at all.
  • Plastic furniture isn’t eco-friendly. Though plastic reduces the usage of wood, it isn’t biodegradable. People say that you should not cut down trees to make furniture. But still, there are lots of health hazards related to plastic.

Watch: How a Plastic Chair is Made

Very Step By Step Guide On How a Wooden Chair is Made

A wooden chair is made from a single piece of wood. Though the component changes from one to another, the basic remains the same.

It is true whether a woodworker makes a single chair or thousands of chairs.

A chair is a piece of furniture raised surface naturally used to take a seat for a single person. It is supported by four legs and has a back.

There are some different chairs having only three legs. Normally chairs are made of various materials, ranges from wood to metal to synthetic material especially plastic.

They are of various colors and may be upholstered or padded and fabrics either may be one seat or the total chair.

Chairs are useful to use in rooms of homes, schools, various other workplaces, and offices.

A chair without arm or backrest is just like a stool or if raised on a bar stool. A chair having arms is called armchair and along with upholstery, reclining actions, a fold-out footrest, a recliner.

How a Wooden Chair is Made

A fixed chair normally we see in airplane or train, bus or theater, airline seat. If riding, it is a bicycle saddle or saddle for an infant car seat or a car seat.

If there are wheels, it is called wheelchairs, and when it is hung from the top, it is called a swing.

Padded, an upholstered chair for more than one person is a sofa, couch, settee or love seat, or it is not a bench or upholstered.

A different footrest for a chair normally covered, is knowing as a hassock or pouf or an ottoman.

Designing a Chair

Before thinking to make a chair, the designer must think about it in such a way that it must be comfortable to sit in.

The home woodworker makes a hand draw a design and makes prototype an of the scrap lumber to be sure that the chair is stable and safe.

Famous furniture makers hire engineers to make the design of the chair by computer-assisted drawing programs and then make and test the finished chair.

Every flaw is tweaked with the CAD program as long as the chair is thought to be safe and comfortable.

The Components

There are three things common in all chairs. A chair back, a way to raise from the floor and a seat. Thought the get up may different, all chairs include these three things or parts.

How a Wooden Chair is Made

Chairs having no back may seem a stool. The other components are stabilizer bars, footrests, and armrests. If the individual parts are made well, the following thing is to build methods used.

Putting It All Together

It is up to the style of the chair, every component is manufactured well individually. The legs and the backs are added and the seat is formed.

The other additional parts like armrests are added with the chair. For some other chairs, these parts rare milled individually and adjust together for the standard chair.

Cushioned or upholstered chairs have hold springs or stuffing prior to the external covering to the seat is added.

After Assembly

If the finished chair is well assembled, the makers use a finish on the wood. The finish may be paints, stains, or simply oils to carry the get up of the wood.

Some chairs have polyurethane to save the wood from scratches or spills. Any fabric may be treated with chemicals to ensure same protection on the chair.

The Finished Product

Chairs appear in different sizes and colors. You will get from toddler chair to the oversized recliners, they all add the fundamental of chair building.

For strict manufacturing method, any wooden chair is safe and would remain for a long time. If you take proper care of a chair, it would be a treasured antique for your future generation.

Chair made of wood

Wooden stools and chairs are made from any type of wood accessible. If you desire to get fine furniture, the hardwoods would be the best alternative.

However, most agreeable chairs are fabricated from littlest woods. Hardwood seats are very popular among the people.

It takes special bits of steel though expensive segments are used greatly to make hardwood seats. If you like to make a fabricated mission- chair, you should better use hardwood.

Poplar

Poplar is greatly used to make chairs for having great adaptability. You may get popular in twisted wood chairs.

The segments of the chairs are same as bowed legs and backs which are stuck up from daintily cut lacquers. These are framed and packed into bends.

An expert worker may make a design from these bowed parts. Later on abnormal plans are molded with bowed wood.

Since poplar has some flex in it, people like this chair very much. It is a matter of regret that the flex element may superimpose the seat timely if manhandled.

Mahogany

Mahogany is a very popular wood to make chairs. The semi-delicate compositions and warm hues make it easy to work with. It mixes well.

Sensibly steady and straight grain is designed which may usually overlay. It makes a mahogany chair verging on split verification.

People use mahogany wood more than other woods. So there are more mahogany seats.

Maple

Maple is other very popular wood to make this chair. It has a tight grain design which is disorganized same as oak.

It is also the hardest wood accessible which is once greatly used for making furniture.

Maple has a light-hued and warm gleam which make a very wonderful chair. This wood is greatly used for carbide-tip saws, boring apparatus and honed.

At the time of making a seat from maple, you must show tolerance and consideration much.

Pine

The pipe is a very popular wood. People are using various types of furniture with this wood for a long time.

There are different varieties of pineapples namely White, Sugar, Ponderosa, and Yellow.

Every one of these wood is incredibly fine to make gorgeous furniture. Pine is something by which it is difficult to work with.

Chair material

Chairs are made of metal, wood, other strong materials such as acrylic or stone. Suppose the seat and the back of the chair are made of plastic. The frame and legs come from metal.

People use hardwood to make the top of the chair to sit well. Some seats are well covered with padding or upholstery.

The design drills with gaps for decoration and permeable materials. There is a gap or low back which gives well ventilation. You can expand the height of the occupant’s head. It optionally holds a headrest.

Chairs are made from creative materials likely recycled materials. These materials are wooden play, cutlery play bricks, plumbing tubes, corrugated cardboard, pencils, rope, and PVC pipe.

Chairs are made of unusual materials in rare cases particularly as a form of experiment or art.

Raimonds Cirulis who is a Latvian interior designer has designed a volcanic hanging chair. This chair is made of volcanic rock.

Another Dutch-born German designer, Peter Brenner made a chair from lollipop sugar – sixty pounds of confectioners’ sugar.

How to do

This wooden dining chair will give you a smooth style. The measurement is possible to change by adjusting different sizes.

You can adjust easily the back style of your desire. All skills are simple and easy to acquire.

At first, you need to store or gather some materials. The necessary things are a sheet of 1.5″ plywood, 2x2s, 1x4s, a drill with a 1/4″ bit, 1/4″ dowels, 2.5″decking screws, wood glue, a jigsaw, screws and a circular saw etc.

You can borrow the saw from a major hardware store or from the local companies.

Slash the sides. The measurements you need are:

  • Two 16.5″ pieces of 2×2
  • One 14″ piece of 1×4, then tear that lengthwise into 2 long pieces.
  • Two 14″ pieces of 1×4
  • Two 37″ pieces of 2×2

Assemble the sides.

  • Cut identically spaced 1/4″ holes into both ends of the 1×4 boards.
  • Bore1/4 inch holes halfway to the 37-inch posts, 15 1/3 inch from the nadir after that 14 1/6 inch from the depth.
  • Make 1/4 inch holes half-way to the 1.65 posts, 1 1/6 inch from the top and finally 2 1/3 inch from the top.
  • Use glue and then place in dowels to the holes. You may fit all pieces together to make 2 sides of the chair. The side parts may be flush with the zenith of the short posts.
  • Drill 1×4 4 inches up from the depth of both sides of the pieces and add it with the screw into the place.

Prepare for the connections.

  • Cut 3 pieces measuring: 14″ 1×4, 12″ and 1×4
  • From the plywood, cut 17×17 inch square piece for making the seat. After that, cut 1.5″x1.5″ notches from 2 of the corners of the board to ensure the place for back posts.
  • Make a 1/4 inch dowel holes to the edge of 1x4s on the long side.
  • Line up these pieces with the seat pieces that have notches. Mark the place of the dowel holes from 1×4 inch onto the seat piece between 2 notches. Make 1/4 inch dowel holes there also.
  • Make 1/4 inch dowel holes into the center. Each of your three pieces is created from 1×4.
  • To add decking screws, make pilot holes 1 3/4 inch from the above of the short posts and 14 ¾ inches from the depth of all posts.

Make the back side of the chair. Glue and enter dowels to both ends of the three pieces to make from the 1×4.

Later on, enter then to the 1×4 and to the seat back. Set glue well before moving ahead.

Enter the seat or back combination. Use glue and then place the seat in place with the 2 side piece under it.

The back part adjusts well to the notches. Enter the decking screws inside the plywood and down the middle of the front posts.

Lock everything in its place.

  • Use glue and slide the 2 final aprons. Screw them through the pilot holes that you make earlier.
  • Enter 2 more decking screws; move inside the seat and to the back apron. Place the screws between 3 vertical bars.
  • You may make a stronger connect along with corner brackets inside of the chair if you like so.

Prepare or sand the surface of the chair. Sand the whole surface of the chair to make it completely prepare for painting or staining.

You can spend this time to round out the edges if you have no desire to clean line look.

You can paint your chair with your desired paint. When you complete painting, keep it under the sun to dry completely. Now it is ready. You can enjoy your chair just now.

Different Styles of Wooden Chairs

Mission Style Chairs

Mission style chairs are most distinctive chair back styles. It is so distinctive that most people can spot a Mission style chair. The back of the chair has straight edges vertical slats which have a very strong linear presence.

They make a chair which manages to link the gap between traditional and modern styling. This chair has 2 legs in the old camp and 2 legs in the new camp.

This is a very versatile wood chair style. It works well like an occasional chair in living room décor but can blend with lots of dining room table styles.

Windsor Chairs

Windsor chairs are named as Mission style chairs. It has a recognizable curved back touching vertical spindles. They are thick in the middle and narrower at every end.

These chairs are an early English style of wooden chair. Most chairs have spindle legs whereas Mission style chairs have more angular styling slip in modern design.

Windsor chairs make the trip into present days. These chairs are better for any country to décor style. Windsor Chairs fit well in some casual dining rooms for having a graceful opening.

Ladderback Chairs

Ladderback chairs are conventional wood chairs. These are smoothly spaced horizontal wooden slats that are set up to the backside. So it takes the name ladderback.

These chairs became very popular since the Middle Ages. Still today there is a great appeal of this chair. People use it for the decoration of the room.

The design of these chairs is very nice, so people use it in their homes greatly. They look wonderful for the dining areas of the home.

Finally, they are a wonderful setting for formal dining spaces. The best idea is to decorate a contemporary room with a ladderback chair. It has sleeker materials and lines than those applied in the rougher epoch chairs.

Kitchen Chairs

They are known as kitchen chair which doesn’t imply that they remain in the kitchen. It decorates your dining room very nicely. Wooden kitchen chair is nothing but people call it school chair.

It is a very simple wooden chair with shorten backs compare with an average wood chair. The slats may be horizontal or vertical.

The back of the chair may be straight or little triangular. This chair is very popular for a particular country. So these aren’t very attractive chairs for a formal or ultra-modern space.

Modern Wood Chairs

One can’t summarize all the features of the modern wood chair like other styles described before. There are lots of features of the modern wood chair.

So it‘s very tough to describe the feature of this chair. However, the chair has 3 main things which are commonly described hereby:

  • All are made from bent or curved wood.
  • They have a wonderful feel on a heavy emphasis upon wood grain.
  • They have the flexible and streamlined appearance.

If you set this chair with another décor of your room it looks well. It is an eye-catching addition to your dining room and living room.

Watch: How a Wooden Chair is Made

Types of Living Room Chairs How To Choose The Best One

The owner of the house normally likes to make it more beautiful. The reason is that home is the only place to spend time all through life. You must make a good atmosphere for your home. Sometimes people visit your house. You want to make it enjoyable for them. In such situation, it is your duty to make the home great for your use.

One of the very important factors of the house is the improvement of your living room. The reason is that you have to spend more time there. Besides this is the place to enjoy an intimate atmosphere with all the members. Most of the time we like to spend in our living room, and we do some joyful activities inside the room.

An important but essential feature of the living room is chair. Choosing a great chair for the living room is sometimes very difficult as you are getting lots of products from different shops with various prices. The chair must be comfortable as well as suitable for both your family and for yourself. If you have a poor chair in your room and it is not very attractive, you have to replace it as quick as possible.

There are lots of models in the market. It is very essential to know what type of chair is the best fitting for you. Besides, you have to know the best brand for yourself. Here is the list of some of the best chairs for your relaxing time which will be the best reference.

Accent chairs give not only extra seating but also a super way to add a new silhouette, color or style reference to any room. We have collected our dear styles with suggestions for the way to spot them and where to keep them.

Chair and a Half

A chair and a half is an essential part of the furniture. It is somewhat larger and smaller than a loveseat. The width of the chair and the half is also a good type of furniture for lounging.

The style of the chairs has upgraded, and you may get any one in any style. It has a tight seat, a tight back and loose cushions for the seat and the back. It has a tight back along with a loose seat.

The chair is very versatile and may get many settings like a bedroom or a small dwelling room.

Wing Chair

Though the wing chair is a conventional type of chair, it has been reinterpreted and offered a contemporary flavor by lots of modern designers.

types of living room chairs

Wing back chairs are uncommon in the sense that it has side panels or wings to the back. It works as a shielding from the drafts in a room or more heat from the fireplace. If you need to save the drafts, the wings give a very comfortable surface to keep the head from taking naps.

Candice Olson makes wing chair for Norwalk Furniture, and the chair is very appealing chair, saves for reading or lounging.

Chaise Longue

A chaise is a big long chair on which you may stretch your legs except using an ottoman. The back of it is usually at a semi-reclining angle, and you use the chair for relaxing.

Chaise longue becomes chaise lounge in English usage. It is called so when we allude to a narrow, long lounging chair. Since the chair is all for relaxation, you will get the shape in outdoor furniture.

The Sine Chaise by Thayer Coggin shows elegantly fluid lines which invite you to lounge or well.

Club Chair

A club chair is an upholstered and cushy chair having arms. It has low back and arms as well as frequently upholstered in leather.

types of living room chairs

The word takes from 19 to century England Gentlemen’s Clubs which possess this type of chair to have relaxed.

Like most other chairs of the modern time, it has been updated too. As the leather is normally covering of choice, now club chairs appear with fabrics also.

Occasional Chair

An occasional chair is a kind of chair which is normally used on various occasions. The chair is an extra chair. It becomes very useful when the house is full with guests.

Occasional chairs end up being an old piece in a room. It is used only for decorative value more than the other things. Paula Deen’s The Cameo Back Wood Chair is a type of chair having eye-catching fabrics as well as good wood finishing.

The Slipper Chair

Upholstered, the armless chair has a petite silhouette along with a seat which is very closer to the earth than we are habituated. As space is a scarce resource round your house, then a spider is a very good option.

types of living room chairs

An additional seat on a coffee table especially in a little apartment or prettying up the boudoir.

The low seat height makes the tall people awkward. It was common for Victorian era and 18 the century ladies for an easy chair to get out and in a while slipping on shoes which landed the ascent chairs its identity.

The Wingback Chair

We like to offer thank to an easy to spot accent chair for having signature winged sides as well as the tall back. The good size of the wingback makes it a great counterpart to a big sofa as it gives more room a sense of balance in scale.

types of living room chairs

The aim of the chair is to save the people from heat and roaring fire, winter, etc. There is something undeniably throne such as stately shaped wingback chairs.

The dining chair gives meals added gravitas. Remain in the designated spot. Most of the wingback chairs are very difficult to move for the heft and size of them. It is very useful when there is a stream of guests in the house.

The Bergère

The majestic lines of burgers are simple to spot thanks to its opened wooden structure around an upholstered back and seat. The comfortable seat cushion is that preserves it from feeling overly formal.

types of living room chairs

Keep the chair opposite to the tucked or sofa to the corner of the bedroom with adjusting ottoman.

Add an air of stylishness to particularly contemporary rooms. The power to fit any place speaks to the timelessness of the infection chairs.

Berger has got much popularity among French nobility in 17 the century. They are also the part of stateside palace life, a significant number also used in White House.

Living Room Chairs Buying Guide

Get the Right Size

Determine the size of your living room.

You have to consider the space before setting any furniture. You need to measure the size of the room especially the spot where you like to place the chair. You have to choose the fit of the spot along with walking room around the chairs.

You need to be sure that the chair would not feel very small near to your sofa.

There is a sofa in your room, measure the height of the seat from the ground. Then measure the arms and seat’s width of them. Now buy chairs that are close measurements to be sure of the right proportions of the chair.

Accent chairs fit small spaces.

There is occasional chair also. Accent chairs are smaller compared with fully upholstered living room chairs. This chair has visible frame either an upholstered seat back or an upholstered seat.

They give you chance to add it to your small area of the room. You can decorate your living room with a pair of accent chairs or with a loveseat.

Some can be pulled into the dining room to ensure more seats there. Use an accent chair to increase the beauty of your living room when no one desires to sit there.

Find Your Style

Coordinate with a sofa and sofa chair set.

For some people ‘sofa chair’ refers the sofa itself whereas some people refer it as a chair meant to max with the sofa. Same materials are being used to make a sofa chair like the sofa.

There remains only one seat cushion in lieu of two or more. If you desire to buy a sofa and a set, you need to match these two pieces perfectly.

There are other chances. You can buy them separately to coordinate with some other furniture pieces.

Complement your sofa.

You may desire to get a chair which has a sofa with it. But you don’t get the exact matching. Coordinating the style and color between the chair and the sofa may make the room beautiful.

Attaching furniture pieces are affected by same time period may aid pull your dwelling room together?

Think about the ambiance of the room.

If you live in a more formal room that is used for special occasions, you can use upright back chairs. The upholstered wingback chair is another alternative for you. The specialty of this chair is armrests, winged sides, tall backs.

All these chairs are made to save from drafts but lend an old world and dramatic look of your dwelling room.

If you live in a huge gathering place, you can use pieces that are meant for lounging like chaise lounge and recliners chairs.

Choose a Material

Leather chairs

There are many varieties of leather chairs which come in different styles. You will find the living room a gorgeous feel as they have clean lines and smooth finish.

All match well with the modern furniture of your room. One most popular choice is the club chairs. This chair comes with armrests and conventional designs.

The low backs of the chairs are almost parallel with the armrests. The taller armchairs reclined from plusher and softer leather for giving wonderful seating all sides of the TV. Leather chairs wear and scuff usually that enhances beauty.

Fabric chairs

Since you have a desire to get colorful or casual, you may choose the materials. You will get fabric chairs which are found in many hues and patterns. They may provide a lively splatter of color in the room.

Microfiber chair

Do you possess pets or children? You may desire furniture made of easy to clean materials such as microfiber chairs. You have options to choose various styles and color patterns.

How To Paint A Wooden Rocking Chair A Useful Learning Guide

A pair wooden chair has nothing to say for a covered porch. If you protect the chair correctly from the outside material, it will give you years of enjoyments.

When you paint the chair well, it will make a water resistant surface on the chair. The surface helps to save from rotting or warping. There are lots of chairs in the markets with different colors. Your rocking chairs become an attractive design element for your patio and porch.

Step 1

Sanding With a Sander

I like, to begin with, a palm sander and hundreds grit sandpaper to work for better-quality grit. The chair is very rounded, detailed and more hand sanding is required.

Step 2

Hand Sanding

At the time of sanding, I would like to apply wrap sandpaper round a wooden block. It makes the thing easier to maintain and preserve sanding smooth.

While sanding rounded edges and ultimately use the papers as is and be sure to obtain all the crannies and nooks. When sanding, the target is not to sand away the real paint but to make a smooth as well as a flat surface to stain.

Step 3

Cleaning the Chair

This is true that it is a very favorite part for me. It is better to remove all the dust from the chair before you like to do the painting. You can do a dry paper towel to remove dust from the chair.

how to paint a wooden rocking chair

Then you can use the original dusting use Windex to remove dust from the chair. Before using any paint dry clean the chair well.

Step 4

Painted rocking chair ideas

These following colors I am going to consider:

  • Greek Blue
  • Duck Egg
  • A random color of Behr clearance paint
  • Provence

If I think of stain, it seems to me that it is typically brown. I like to use something I buy from the mill store and apply for my patio flooring. I become astonished if I told the paint guy at Lowe’s what to use on the outdoor rocking chair.

He told me the white stain. If you use regular latex paint over time, the outdoor element will become peel and yellow. At present the Olympic stain seemed and brushed on like paint.

Begin with the underside of your rocking chair. I like to do it so as later on I must flip the chair over while the other part had got fresh paint. I have got two coats of paint to the underside and let it finish dry prior flipping it over.

Step 5

Finishing

I finish it by removing the stains. I like to keep it under to the sun to make it dry for few hours. Though there is also a sealant in the chair, I finished the chair off with a finishing spray. It gives very finished look and sheen.

Paint Colors for Painting Furniture

This post is coming to the web for a long time. I have taken few hours to do my study work. You may put together your dear paint colors for future revamps.

There are various fantastic colors of painting furniture. This is very difficult for me choosing one from the list of 16. I have lessened the list depends on present color drifts in design/furniture.

Moreover, I have chosen the most adaptable colors. I have chosen one which is nice to look at amongst various furniture.

Now closely notice the palette

  • SW= Sherwin Williams
  • BM= Benjamin Moore
  • GL= Glidden

I would like to share my tutorials with some of the awesome bloggers. Many of the colors of the present world rely on blogger schemes.

Here you will get some examples of different colors within the actions. There are many instructions by which the users can do the works steps by steps.

In this way, a user can paint his pieces according to his desire. If there are more tutorials, I would like to mention it below by the picture with the link.

I have written a very good tutorial for the beginners. If you have no experience, in this case, you can read it. I hope you will get benefit from it. Normally you will be able to paint according to your wish.

I like to break the color down under by Neutrals, Whites, Darks, and Bolds. I don’t feature all the colors in a palette to preserve this post except being very long.

White Paint Colors

For a real white, my dear is Decorators White from Benjamin Moore:

Decorators White Benjamin Moore

Are you searching a real white along with few hints of warmth? The best option is the White Dove from Benjamin Moore. This is very famous. Neat and cupboard color forms all whites. This happens as it is very versatile. It also works well with anything.

Neutral Paint Colors

The best color here is Mindful Gray which is taken from Sherwin Williams. This is ideal in the sense that it keeps the exact equilibrium of warm gray.

Mindful Gray is a wonderful color as it looks very wonderful on walls, cabinets, and furniture.

The reason is that it has a perfect balance or cool tones. I would like to show more examples. I like this color very much.

Mindful Gray Sherwin Williams. Tutorial from Claire Brody Designs here.

It is a Mindful Gray which I used for my friend. You may notice a tutorial for painting a buddy satin finish:

Mindful Gray Sherwin Williams

You may normally see that nice balance cool tones of Mindful Gray in my craft room. I would like to paint the cabinet with this color.

Mindful Gray Sherwin Williams

For light gray which leans cooler and less warmth than mindful Gray. Manhattan Mist from Behr is a nice wonderful color.

Watch: How To Paint A Wooden Rocking Chair

Very Easy Guide On How to Repair a Wooden Chair Back

Few pieces of furniture get more abuse than the chair. The reason is chaired must solve two main problems. They need to be strong to hold or light enough to mobile.

Big loads, constant movement, and light joints add up the tear and wear on the chair joints. The chair is the common item to bring into shops.

If you are a woodworker, you can repair it frequently. The article will aid you to show the right way to repair the chair.

I recoiled when I thought to repair the chair. I thought loose joints would need a healthy dose of PVA glue and little fasten pressure.

It seemed to me the chair is superior and strong enough when I have done it. But after few months and the joint became loose again.

Some lesson and a small research aid me to know that my approach is well intentioned and fully wrong.

Most of the chairs are made before 1950 and were kept with the hot hide bond. The beauty of the glue is reversible. This permit you the reach the glue with some water make repairs easy. PVA glue messes the things up.

Hide glue as well as PVA glue work for soaking the wood fiber. The problem is to add PVA glue with the fix hide glue joints assembled.

The cured cover glue works as a sealer and resists the new glue penetrating the lumber fibers. The water of the PVA glue helps to reactivate hide glue and may help for wood fiber diffusion.

But joint has very burly glue bond if requires withstanding Uncle Henry variable around the chair at Thanksgiving. Finally, PVA is not turntabled to make future revamp work hard.

In this section, I emphasize how to make joint with glue and how they are structurally sound.

Then I will let you know the way of broken dowels, the way to clean PVA glue from my past repair or some basic things I have learned from May years to ensure a trouble free and guarantee successful repair.

Wooden chair repair parts

You are making your chair from scratch or repairing; it will last for few years. You will get everything to do the job right here. We are ready to offer the highest quality products from leather, cane seats and wood to decorative caning tools or wooden chair legs.

We have lots of components and made different sizes. Therefore you will get your desired size what you are looking for a long time. You can get what you like to get at Van Dyke’s to preserve your chair looking the best for the coming years.

Chair repair tools

Teri Masaschi, author of Foolproof Wood Finishing:

People who like and love to Build & Hate to Finish knows it well that it is a great fun to shop new wood finishing products. At the first time of starting out, you must not go overboard.

“Buy per project: You must not fill your cabinet with the thing you desire. You must fill the cabinet completely before you are aware of it.

You need some basis to start; all are masaschi’s suggestion for a great round arsenal of tools.

If you buy something to see the label well with the date of buying. Time moves very quickly and the products may not last for a longer time.

All of the following are available at big-box stores:

  1. This is a wonderful thick stripper for the removal of paint. To get thick paint on an old wood piece, you can buy a goopy product. The product can cling to the piece like Klean-Strip Semi-Paste Stripper.
  2. Thin stripper to finish exclusion. You must not keep staying power for a long time to remove old finishes. Masashi expresses that old masters are selling a fine watery stripper, TM-1. Take a small pan and wash down the piece by soaking it once again by the brush. The stripper will dissolve everything very quickly. This is really superb.
  3. A power sander. When you finish stripping, you have to smooth the surface sanding it. You can cut down a power sander for a big job. You may sand by hand about hundred to 200 strokes per minute. But a power tool may whip out six thousand to eight thousand strokes in the same time schedule. You have to put sandpaper discs on your hand in a range of grit sizes from eighty to 220.
  4. Fine sandpaper. The fine believable sandpaper is from Shopsmith, Masaschi says. It remains sharp and lasts for a long It is super quality. Moreover, the power sanding discs take some 320 to 400 girt sheets with a couple of blocks for hand sanding. There are many blocks on the market. You should use a wood block or a felt block with few glued to it.
  5. Wipe on finishes and stains. Masaschi suggests wiping on products for the amateur wood finisher like Minwax Wipe-On Polyurethane and General Finishes gel topcoat. If any person is taken all my spray guns away, I would move to wipe-on.
  6. There remain lots of coats to ensure durability. These are very simple to use and very pretty. Brush on the surface of the products and use few coats to make a tough surface. It remains wet for longer. Therefore you will get sags, drips, brushstrokes which debris and show and dust falling on the finish. Rinse the product well and remove a headache completely.

how to repair a wooden chair back

Repair Backs

  • Hold back rail and spindle by your hands. Twist and wiggle them personally. Extract rails and spindles which are cracked or loose.
  • Enter knife into the splits or cracks. Pry the section open as much as you can. Enter wood glue to the crack to saturate it. Take out the knife. To compress it keep clamps to the racks. If clamps do not enter, wrap it with masking tape. Use a damp cloth to remove excess glue. Keep it for the whole night to make it dry and take away clamps or the strip. Scrape off the dried glues by using the putty knife.
  • Enter a 1/4 inch drill bit to a driver or drill. Insert it into the tip of the bit at the place where loose back or spindles penetrate to cross member or chair seat to the top. Tilt it up to thirty degrees. Drill from up to down to the end of the rail or spindle at least one and a half inch in depth. If bit penetrates all the way well to the other side, then it is perfect.
  • Enter glue inside the hole. Tape one 1/4-by-1 ½“ dowel by using a hammer. It is fine if it goes all the way completely. Keep the whole night to make it dry. Cut the end of the dowels if it remains outside. Color it with the stain marker to adjust the color of the chair.

Tips on how to repair a wooden chair back

Use stain marker to repair the dried glue spots or lines that you have made a mistake. Notice the bottom of the chair’s legs.

If you see the missing glue, buy a new one and hammer in them well. Chair glides may seem to look thumbtacks on steroids.

It aids the chair to slide rather than binding on rough floor or carpets. It reduces the stress on the chair, permit to remain for a longer period to remain.

The examples are average two inches thick. If the parts are smaller or bigger, use the desired size dowel.

1 2 3